Hardwood Revival's experts are here to answer your questions! Read all you need to know about wood floor in the following Q & A.

What Are Hardwood Floors?

Hardwood floors are one of the choices homeowners have when choosing floors for their homes. Before wall to wall carpets became so cheap, wood floors were the most common floors in American homes. Wood Floors are a great choice as a design item as well - they look good, they've got a luxurious look when maintained properly, and they also last almost forever.

What Types Of Wood Floors Are There?

There are two main types of wood floors - solid hardwood floors and engineered wood floors. They differentiate by how they're made - hardwood floorboards are made from a single piece of wood, while engineered wood floorboards are made of layers of wood and topped with hardwood veneer. Engineered wood floors are more resilient to weather, moisture and fluids compared to traditional hardwood floors.

Are Engineered Wood Floors And Hardwood Floors The Same?

No, solid hardwood floors and engineered wood floors are not the same.

Should I Choose Hardwood Floors Or Engineered Wood Floors?

It depends. There are many variables to this question, and no two homes will get the same recommendation. It's important to understand that the location of the wooden floors in your home, the amount of traffic walked on them, the weather in your area, the humidity and the long term plans for the home are all factors to weigh in when choosing hardwood floors.

How to Refinish Wood Floors?

It requires several steps:

  1. Clean the floor and prepare the room
  2. Sand the floors - from coarse to fine grit sandpapers, until the surface is smooth
  3. Stain / seal the floors
  4. Apply coating (polyurethane)
  5. Wait for it to dry

You can read more here: What is Hardwood floor refinishing?

How Much Does It Cost To Refinish A Hardwood Floor?

Simple answer - Anywhere between $1.5 to $5 per square foot, which means anywhere between $150 to $1,000 per room. Precise pricing can only be given on site, and after inspecting which type of floor is it, what finishing does it have, is it a high traffic area, did it suffer direct sun, or maybe humidity or water spills?

It also depends if the floors are solid hardwood or engineered wood floors, as engineered wood floors would require a very different process from solid hardwood floors.

How Long Does It Take To Refinish A Hardwood Floor?

A simple refinishing will take as little as two days, where one day would be preparation, sanding and coating the floors, and another day waiting for the polyurethane to dry. In more complex jobs, or when the size of the job is big, it may take anywhere between 3 days and up to 7 days in total. If you plan to stain the floors as well, you need to add 24-48 hours to the schedule.

In addition, if the refinishing is due to water damage or includes restoration of a part of the wood floor for whatever reason, the refinishing can take 10 days and even more.

How Do You Finish A Hardwood Floor?

The most popular finish of wooden floors nowadays is polyurethane, a polymer used to coat hardwood floors which are very durable, and has a variety of looks (gloss / semi-gloss / matte). Other finishes include varnish, shellac and lacquer, which are rarely used today for floors. Some older floors are still coated by these finishes, which may require to continue using them for best results.

How Do You Apply Polyurethane On Hardwood Floors?

Applying polyurethane to a wood floors isn't a hard task, but it requires some skills and a steady hand. After you're finished sanding, cleaning and preparing the surface, apply a coat of polyurethane using a natural bristle brush or floor roller. Keep the strokes going in one direction only (with the grain) and be sure to start from the farthest corner of the room and back out to the door. Usually 2 or even 3 coats of polyurethane would be recommended.

If you're not sure how to do it, either do trial and error by learning at home, or call the pros to help you refinish your wood floors with polyurethane.

How Long Does It Take For Polyurethane To Dry On Wood Floors?

It differs from brand to brand and floor types, but most polyurethane varnishes would take approximately 24 hours to dry and be ready for light use. Before you put the room back to full use, touch the floor in a place less noticeable to see if the coating has fully dried and you won't leave foot marks.

Of course, if the room isn't ventilated, the weather is cold and there is no sun, it may take longer than that. Read more details on the polyurethane manufacturer's guide.

When Can You Walk On Refinished Hardwood Floors?

It takes 24 hours for a polyurethane floor to dry for first light use, so if you do it on the 24-hour mark or before - use shoe covers and hope it really dried completely. Walking freely on refinished floors may take up to 48 or even 72 hours.

How Can I Make My Wood Floors Look New Again?

You have two main choices - simple screening and refinishing, full sanding and refinishing or a complete replacement of the floors. To decide which way is best, you better consult with hardwood floors experts, who would be able to take in to account all the factors and give you the best advice.

Some of the factors affecting such decision - the floor's condition, the wood's age, the condition of the finishing, where the floor is located in the house, and of course - your budget for the project.

How Do I Protect My Wood Floors?

The best protection for your wood floors is by proper maintenance and care. This includes two parts -

Protecting wooden floors on regular basis: Clean the floors with the right cleaning materials. Make sure you don't have water or fluids standing too long on the floor. Watch out for water damage to your wooden floors. Make sure you don't scratch or gouge the floor because of dragging anything, and if you did - try to minimize the damage by taking care of it as soon as possible.

Special protection of wooden floors: in some cases, to protect your wooden floors would require refinishing them, or even restoring them. The common cases would be:

  1. It's been more than 10 years since the last refinishing of the floors.
  2. There are lots of scratches and you want the floors to look new again.
  3. Water damage to the wood floors would require your immediate attention to stop the damage from spreading.
  4. You're renovating the house and want the hardwood floors renewed as well.
  5. You're moving into a new home - if you bought a home, the best thing to do is refinish the floors so you'll know when it was done and by who.

How Do You Stain Wood Floors?

Staining wood floors can be a part of refinishing hardwood floors or their installation. The staining is meant to provide a color to the wood floors. The most common color is ebony, or a dark shade (espresso is a common color these days as well), and the second most common choice is “blonde” or natural wood color.

The stain would be applied to the floor as a sealer, and prior to coating it with protective layers of polyurethane.

How Long Does It Take To Stain Hardwood Floors?

Applying the stain itself is a matter of minutes, or hours if it's a larger area of floor to cover. Other steps of refinishing will take more time. In addition, the long part of applying the wood stain on the floor would be waiting for the stain to dry.

How Long Does It Take For A Wood Stain To Dry?

Different stains take different times to dry, and it also depends on the conditions in the room. In most cases, the drying time for wood floor stain would be 36-48 hours. Darker stains will take longer to dry. If the weather is cold or the room is not ventilated, it's going to affect the drying time as well.

How Do You Restore A Wood Floor?

Restoring a wood floor takes several steps and requires knowledge and skills. Go to this article to read more about restoring wood floors.

Can You Sand And Refinish Engineered Wood Floors?

Yes. And no. Engineered wood floors require lots of attention and very delicate handling of refinishing. Not all engineered wood floors can be refinished, due to their structure and characteristics. If you want to find out, call hardwood refinishing experts who can help you further, or call the engineered wood floor manufacturer for more details.

It is important to mention that not all solid hardwood floors can be refinished either. If the floors have been refinished several times or damaged for some reason, it could be impossible to refinish them without creating further damage.

How Do You Clean Wood Floors?

Cleaning wood floors is a simple process. First, clear the floor from any object that can be moved. Then, vacuum with the brush extension or dry mop the entire floor. After most dust and debris is removed, you can mop the floor using water and a few drops of dishwasher soap, or a special cleaning solution for wooden floors. Mop with the grain in smooth strokes across the room.

IMPORTANT: If your floors are coated with Shellac or lacquer, don't use water. Your floors aren't waterproof and the water will cause damage to the floors.

Last step of cleaning wood floors would be to buff the floor with a dry cloth or mop. This will make your floors shine and remove any soapy residue left on the floor's surface.

How Do You Clean Floorboards?

Exactly the way you clean wood floors. See section above.

What's The Difference between Unfinished Wood Floor and a Prefinished Floor?

When you purchase new wood floor boards from the store, you can choose between an unfinished wood floor and prefinished wood floor. As the name suggests, it's all about the finish of the floor boards.

Unfinished wood floor: these wood floor boards will come unfinished with polyurethane or any other cover, and will be coated after they're installed. This gives more choice and freedom to the home owner, who can stain the wood, or choose which type of finish he wants. However, unfinished wood floors are harder to restore in case of damage since the coating and condition isn't unite throughout the whole floor even if done by the most experienced hands.

One main pro from unfinished floors is that since the finishing and sanding are done when installing the floor, the surface will be a lot smoother. A prefinished floor will have some grooves or inconsistencies between planks in some cases.

Prefinished wood floor: The floor boards will come coated and finished by the manufacturer, which makes them easier to handle and install. They're also easier to replace in case of damage or restoration. However, they're harder to match to existing wood floors, and if you have damage but your model is out of stock, you're in trouble.

The main pro prefinished floor reason is that it saves lots of time since there is no finishing needed. Moreover, it comes from the factory with 5-6 layers of coat, while unfinished wood will usually be coated twice or maybe three times when installed.

How to keep a rug from sliding on the hardwood floor?

Rugs undoubtedly liven up your living space but don't tend to stay in the same place on hardwood floors. To prevent this, you can use caulk or hot glue, use a fitting non-slip pad or lay down Velcro strips on the hardwood floor to provide the needed adhesive force. When using the non-slip pads, ensure that you purchase the right pad and size it before applying to the rug.

How can I remove wax from the hardwood floor?

Wax is a good source of protection for hardwood floors. However, it never hardens enough and may end up collecting dust and dirt. For this process, you will need clean rags, mineral spirits, steel wool, and a mop. Begin by moistening the rug with mineral spirits and rub-down the floor. If the residue proofs tough, use steel wool moistened with mineral spirit to scrub it off until the area remains clean. Mop the area with hot water after all the wax is stripped and dry using a rag.

Can you remove the hardwood floor without damage?

Yes. Though time-consuming, removing hardwood floors without damage is possible. You have to be careful, especially if the planks are glued down. For click-type hardwood flooring, you can just lift and separate them. For solid wood, you should determine the direction that the planks were laid to reverse the installation. For tongue and groove hardwood floors, use a reciprocating saw to cut the nails and gently lose each board before removing.

How do you level a floor for hardwood?

To level the subfloor for hardwood installation, you will need a hammer, screwdriver, carpenters' level or straight board, dust mask, wet-dry vacuum, painters' tape, plastic sheeting, trowel, and medium-grit sandpaper. Begin by checking levelness using a level or straight board across all directions. If there are high and low spots, use the various tools, such as sandpaper and vacuum to remove the dust, to level the spots.

How do you remove paint from a hardwood floor?

Wiping out wet paint immediately after spills is the best way to prevent staining on your hardwood floor. However, for already dried paint, use either of the following methods.

  • Use soap and water for water-based paint
  • Use an effective paint remover
  • Use denatured alcohol with a rag
  • Use alcohol-based cleaning pads
  • Use a paint thinner as a last resort.

How do you install a hardwood floor on a concrete slab?

Though possible, it is quite difficult to install a hardwood floor on concrete slab compared to a wood subfloor. For this case, begin by installing a ¾-inch thick wood underlayment. This combination raises the floor to approximately 11/2-inch high, thus be sure that this doesn't create problems on cabinets and doorways. To eliminate potential water problems, lay a polyethylene sheet over the concrete to prevent water from rising up to the wooden flooring. Proceed by nailing the flooring planks using a standard flooring nailer to the underlayment.

What are the best hardwood floor cleaners?

Unlike carpet and rugs, wood floors require constant maintenance and care, as well as day-to-day cleaning beyond the daily sweep. The best hardwood floor cleaners not only keep the floor sparkling but also extend the floor's life. The best five cleaners available on the market are:

  • Bona hardwood floor cleaner
  • Black diamond wood and laminate floor cleaner
  • Pledge clean it gentle wood floor cleaner
  • Parker and bailey wood cleaner
  • Zep commercial hardwood cleaner

How to choose the right hardwood floor type?

You should consider several factors when choosing the best type of wood flooring to install in your home. Among the key concerns include:

  • The type of finish
  • Installation method
  • Grain pattern
  • Prefinished or site finish flooring
  • Engineered hardwood or solid wood floor
  • Plank width

How to remove carpet glue from a hardwood floor?

You will need an adhesive remover, mineral spirits, sponge or paintbrush, plastic knife, fan for ventilation, rubber gloves, rags, and sealant. Before embarking on the process, identify the type of glue. Dark-brown or tan glue is tar-based, and mineral spirits can remove them. Yellow-colored glue is general carpet adhesive glue, which requires some chipping and scrapping with adhesive removers.

How to get candle wax off the hardwood floor?

If you burn candles at home, accidental spills are sometimes unavoidable. To remove them:

  1. Begin by cleaning the wooden floor with warm water. This removes any dirt and residue sitting on the surface.
  2. Apply a generous amount of mineral spirit to the affected area
  3. Scrub the wood flooring using a clean cloth or mop. Apply vigorous pressure to help remove the residue.
  4. Use a floor scraper or fine steel wool for any remaining wax
  5. Wipe with a clean cloth to dry the floor.
Contact us today as a first step in deciding on how to revive your home's flooring. We guarantee a job done right at a reasonable rate.
For an estimate call 888-647-2123
Or fill out the fast form below and we will reach out to you